Structured Cabling Termination

Structured Network cabling

 

This is typically used in office data networks, commercial building data networks or campus telecommunications infrastructure with all data outlets typically terminating at a central patch panel (which is normally 19 inch rack-mounted) and a RJ45 outlet. 

We are able to carry out the termination of all catagories of network cabling installations in Cat5e, Cat6, Cat6a and Cat7 UTP and FTP type cables, offered inT568A and T568B termination  configurations onto patch panel and RJ45 outlets. The primary colour of pair one is blue, pair two is orange, pair three is green and pair four is brown. Each pair consists of one conductor of solid color, and a second conductor which is white with a stripe of the same color. The specific assignments of pairs to connector pins varies between the T568A and T568B standards. Our engineers will neatly install all cabling and punch down onto copper patch panels. On completion full DTX test results will be made available.

Associated Installation Services

 

Need Training Visit our Training Services 

 

Structured Cabling Termination
Request a Callback

The terminating of Network Data Cabling in catagories Cat5e, Cat6, Cat6a and Cat7 can be offered in UTP, FTP and STP configurations.

These can be terminated onto data cabling patch panels, wall outlets, floor boxes or with RJ45 connectors.

CW1308 can be terminated onto the following:

  • 4 wire krone patch panels
  • 6 wire krone patch panels
  • Krone termination blocks and frames
  • RJ45 wall outlets
  • RJ11 wall outlets

CW1128 can be terminated onto the following:

  • Krone termination blocks and frames